Skocz do zawartości
Zaloguj się, aby obserwować  
zomb

[SPRZEDAM] SP BEST OF - ze starej oferty ovh

Polecane posty

SP BEST OF.

- łącze Unmetered Premium ( wysokie priorytety na peering i tranzyt )

- Backup 750 GB, (a nie 100GB)

- 4 IP Failover, (a nie 3 jak w nowej)

- Dodatkowo 2 IP dokupione bez możliwości rezygnacji, czyli razem 6 IP Failover

- Serwer + 2 IP = 290,35 zł brutto / m-c

 

2 x Intel® Core™2 Duo CPU E6750 @ 2.66GHz

4GB RAM DDR2

2x750GB

 

Kontakt:

- PW (po napisaniu wiadomości podam gg lub telefon)

 

 

 

cat /proc/cpuinfo

processor   	: 0
vendor_id   	: GenuineIntel
cpu family  	: 6
model   		: 15
model name  	: Intel(R) Core(TM)2 Duo CPU 	E6750  @ 2.66GHz
stepping    	: 11
cpu MHz 		: 2666.624
cache size  	: 4096 KB
physical id 	: 0
siblings    	: 2
core id 		: 0
cpu cores   	: 2
apicid      	: 0
fpu     		: yes
fpu_exception   : yes
cpuid level 	: 10
wp          	: yes
flags   		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips    	: 5333.24
clflush size	: 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

processor   	: 1
vendor_id   	: GenuineIntel
cpu family  	: 6
model   		: 15
model name  	: Intel(R) Core(TM)2 Duo CPU 	E6750  @ 2.66GHz
stepping    	: 11
cpu MHz 		: 2666.624
cache size  	: 4096 KB
physical id 	: 0
siblings    	: 2
core id 		: 1
cpu cores   	: 2
apicid      	: 1
fpu     		: yes
fpu_exception   : yes
cpuid level 	: 10
wp          	: yes
flags   		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips    	: 5333.02
clflush size	: 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

 

HDD: #1

smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family: 	Hitachi Deskstar 7K1000
Device Model: 	Hitachi HDS721075KLA330
Serial Number:	GTF202P8H802YF
Firmware Version: GK8OAB0A
User Capacity:	750,156,374,016 bytes
Device is:    	In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 1
Local Time is:	Tue Sep 28 20:53:22 2010 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                              		was suspended by an interrupting command from host.
                              		Auto Offline Data Collection: Enabled.
Self-test execution status:  	(   0) The previous self-test routine completed
                              		without error or no self-test has ever
                              		been run.
Total time to complete Offline
data collection:         		(11471) seconds.
Offline data collection
capabilities:                	(0x5b) SMART execute Offline immediate.
                              		Auto Offline data collection on/off support.
                              		Suspend Offline collection upon new
                              		command.
                              		Offline surface scan supported.
                              		Self-test supported.
                              		No Conveyance Self-test supported.
                              		Selective Self-test supported.
SMART capabilities:        	(0x0003) Saves SMART data before entering
                              		power-saving mode.
                              		Supports SMART auto save timer.
Error logging capability:    	(0x01) Error logging supported.
                              		General Purpose Logging supported.
Short self-test routine
recommended polling time:    	(   1) minutes.
Extended self-test routine
recommended polling time:    	( 191) minutes.
SCT capabilities:          	(0x003f) SCT Status supported.
                              		SCT Feature Control supported.
                              		SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME      	FLAG 	VALUE WORST THRESH TYPE  	UPDATED  WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 	0x000b   100   100   016	Pre-fail  Always   	-   	0
2 Throughput_Performance  0x0005   100   100   054	Pre-fail  Offline  	-   	0
3 Spin_Up_Time        	0x0007   144   144   024	Pre-fail  Always   	-   	429 (Average 401)
4 Start_Stop_Count    	0x0012   100   100   000	Old_age   Always   	-   	89
5 Reallocated_Sector_Ct   0x0033   100   100   005	Pre-fail  Always   	-   	0
7 Seek_Error_Rate 		0x000b   100   100   067	Pre-fail  Always   	-   	0
8 Seek_Time_Performance   0x0005   132   132   020	Pre-fail  Offline  	-   	33
9 Power_On_Hours      	0x0012   099   099   000	Old_age   Always   	-   	10786
10 Spin_Retry_Count    	0x0013   100   100   060	Pre-fail  Always   	-   	0
12 Power_Cycle_Count   	0x0032   100   100   000	Old_age   Always   	-   	89
192 Power-Off_Retract_Count 0x0032   100   100   000	Old_age   Always   	-   	92
193 Load_Cycle_Count    	0x0012   100   100   000	Old_age   Always   	-   	92
194 Temperature_Celsius 	0x0002   150   150   000	Old_age   Always   	-   	40 (Lifetime Min/Max 20/65)
196 Reallocated_Event_Count 0x0032   100   100   000	Old_age   Always   	-   	0
197 Current_Pending_Sector  0x0022   100   100   000	Old_age   Always   	-   	0
198 Offline_Uncorrectable   0x0008   100   100   000	Old_age   Offline  	-   	0
199 UDMA_CRC_Error_Count	0x000a   200   200   000	Old_age   Always   	-   	0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  1    	0    	0  Not_testing
  2    	0    	0  Not_testing
  3    	0    	0  Not_testing
  4    	0    	0  Not_testing
  5    	0    	0  Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

 

 

HDD: #2

smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family: 	Hitachi Deskstar 7K1000
Device Model: 	Hitachi HDS721075KLA330
Serial Number:	GTF202P8H7ZV4F
Firmware Version: GK8OAB0A
User Capacity:	750,156,374,016 bytes
Device is:    	In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 1
Local Time is:	Tue Sep 28 20:53:28 2010 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                              		was suspended by an interrupting command from host.
                              		Auto Offline Data Collection: Enabled.
Self-test execution status:  	(   0) The previous self-test routine completed
                              		without error or no self-test has ever
                              		been run.
Total time to complete Offline
data collection:         		(11471) seconds.
Offline data collection
capabilities:                	(0x5b) SMART execute Offline immediate.
                              		Auto Offline data collection on/off support.
                              		Suspend Offline collection upon new
                              		command.
                              		Offline surface scan supported.
                              		Self-test supported.
                              		No Conveyance Self-test supported.
                              		Selective Self-test supported.
SMART capabilities:        	(0x0003) Saves SMART data before entering
                              		power-saving mode.
                              		Supports SMART auto save timer.
Error logging capability:    	(0x01) Error logging supported.
                              		General Purpose Logging supported.
Short self-test routine
recommended polling time:    	(   1) minutes.
Extended self-test routine
recommended polling time:    	( 191) minutes.
SCT capabilities:          	(0x003f) SCT Status supported.
                              		SCT Feature Control supported.
                              		SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME      	FLAG 	VALUE WORST THRESH TYPE  	UPDATED  WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 	0x000b   100   100   016	Pre-fail  Always   	-   	0
2 Throughput_Performance  0x0005   100   100   054	Pre-fail  Offline  	-   	0
3 Spin_Up_Time        	0x0007   137   137   024	Pre-fail  Always   	-   	462 (Average 413)
4 Start_Stop_Count    	0x0012   100   100   000	Old_age   Always   	-   	88
5 Reallocated_Sector_Ct   0x0033   100   100   005	Pre-fail  Always   	-   	0
7 Seek_Error_Rate 		0x000b   100   100   067	Pre-fail  Always   	-   	0
8 Seek_Time_Performance   0x0005   134   134   020	Pre-fail  Offline  	-   	32
9 Power_On_Hours      	0x0012   099   099   000	Old_age   Always   	-   	10785
10 Spin_Retry_Count    	0x0013   100   100   060	Pre-fail  Always   	-   	0
12 Power_Cycle_Count   	0x0032   100   100   000	Old_age   Always   	-   	88
192 Power-Off_Retract_Count 0x0032   100   100   000	Old_age   Always   	-   	91
193 Load_Cycle_Count    	0x0012   100   100   000	Old_age   Always   	-   	91
194 Temperature_Celsius 	0x0002   136   136   000	Old_age   Always   	-   	44 (Lifetime Min/Max 20/68)
196 Reallocated_Event_Count 0x0032   100   100   000	Old_age   Always   	-   	0
197 Current_Pending_Sector  0x0022   100   100   000	Old_age   Always   	-   	0
198 Offline_Uncorrectable   0x0008   100   100   000	Old_age   Offline  	-   	0
199 UDMA_CRC_Error_Count	0x000a   200   200   000	Old_age   Always   	-   	0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description	Status              	Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline	Completed without error   	00%  	9672 		-

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  1    	0    	0  Not_testing
  2    	0    	0  Not_testing
  3    	0    	0  Not_testing
  4    	0    	0  Not_testing
  5    	0    	0  Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Udostępnij ten post


Link to postu
Udostępnij na innych stronach

Bądź aktywny! Zaloguj się lub utwórz konto

Tylko zarejestrowani użytkownicy mogą komentować zawartość tej strony

Utwórz konto

Zarejestruj nowe konto, to proste!

Zarejestruj nowe konto

Zaloguj się

Posiadasz własne konto? Użyj go!

Zaloguj się

Zaloguj się, aby obserwować  

×