Skocz do zawartości
j1gg

Jak zdiagnozować czy z dedykiem jest wszystko ok

Polecane posty

Witam, od dwóch dni mam problem z dedykiem, moje serwery csgo się crashuja. Sprawdzałem na wszystkie możliwe sposoby, nawet czysty serwer pada jak mucha. Jak mogę sprawdzić czy ze sprzętem jest wszystko ok? Robiłem coś takiego memtester 1024 5 i badblocks -sv /dev/sda niby 0 błędów.

Przed aktualizacją kernela miałem taki błąd linux-gate.so + 0x435

Teraz coś takiego linux-gate.so + 0xd59

Udostępnij ten post


Link to postu
Udostępnij na innych stronach

smartem wyciągnij dane to coś się może dowiesz

odpal atop albo sysstat z interwałem 1 minuta to zobaczysz co się dzieje przed crashem

 

 

Udostępnij ten post


Link to postu
Udostępnij na innych stronach

smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.6.0-0.bpo.1-amd64] (local build)

Copyright © 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

 

=== START OF INFORMATION SECTION ===

Model Family: Seagate Barracuda 7200.12

Device Model: ST31000524AS

Serial Number: 5VPCTDPZ

LU WWN Device Id: 5 000c50 05c7e45e3

Firmware Version: JC45

User Capacity: 1,000,204,886,016 bytes [1,00 TB]

Sector Size: 512 bytes logical/physical

Rotation Rate: 7200 rpm

Device is: In smartctl database [for details use: -P show]

ATA Version is: ATA8-ACS T13/1699-D revision 4

SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)

Local Time is: Sun Aug 14 14:10:05 2016 CEST

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

 

=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED

See vendor-specific Attribute list for marginal Attributes.

 

General SMART Values:

Offline data collection status: (0x82) Offline data collection activity

was completed without error.

Auto Offline Data Collection: Enabled.

Self-test execution status: ( 41) The self-test routine was interrupted

by the host with a hard or soft reset.

Total time to complete Offline

data collection: ( 609) seconds.

Offline data collection

capabilities: (0x7b) SMART execute Offline immediate.

Auto Offline data collection on/off support.

Suspend Offline collection upon new

command.

Offline surface scan supported.

Self-test supported.

Conveyance Self-test supported.

Selective Self-test supported.

SMART capabilities: (0x0003) Saves SMART data before entering

power-saving mode.

Supports SMART auto save timer.

Error logging capability: (0x01) Error logging supported.

General Purpose Logging supported.

Short self-test routine

recommended polling time: ( 1) minutes.

Extended self-test routine

recommended polling time: ( 176) minutes.

Conveyance self-test routine

recommended polling time: ( 2) minutes.

SCT capabilities: (0x103f) SCT Status supported.

SCT Error Recovery Control supported.

SCT Feature Control supported.

SCT Data Table supported.

 

SMART Attributes Data Structure revision number: 10

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE

1 Raw_Read_Error_Rate 0x000f 118 094 006 Pre-fail Always - 188037260

3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0

4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 18

5 Reallocated_Sector_Ct 0x0033 095 095 036 Pre-fail Always - 240

7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 484336953

9 Power_On_Hours 0x0032 066 066 000 Old_age Always - 30032

10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0

12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 18

183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0

184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0

187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 121

188 Command_Timeout 0x0032 100 098 000 Old_age Always - 4295098401

189 High_Fly_Writes 0x003a 099 099 000 Old_age Always - 1

190 Airflow_Temperature_Cel 0x0022 065 042 045 Old_age Always In_the_past 35 (Min/Max 17/47 #1671)

194 Temperature_Celsius 0x0022 035 058 000 Old_age Always - 35 (0 17 0 0 0)

195 Hardware_ECC_Recovered 0x001a 040 012 000 Old_age Always - 188037260

197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0

198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0

199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0

240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 30087 (163 46 0)

241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1484163697

242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1786202825

 

SMART Error Log Version: 1

ATA Error Count: 24 (device log contains only the most recent five errors)

CR = Command Register [HEX]

FR = Features Register [HEX]

SC = Sector Count Register [HEX]

SN = Sector Number Register [HEX]

CL = Cylinder Low Register [HEX]

CH = Cylinder High Register [HEX]

DH = Device/Head Register [HEX]

DC = Device Command Register [HEX]

ER = Error register [HEX]

ST = Status register [HEX]

Powered_Up_Time is measured from power on, and printed as

DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,

SS=sec, and sss=millisec. It "wraps" after 49.710 days.

 

Error 24 occurred at disk power-on lifetime: 12956 hours (539 days + 20 hours)

When the command that caused the error occurred, the device was active or idle.

 

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

 

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

60 00 c8 ff ff ff 4f 00 39d+13:34:53.009 READ FPDMA QUEUED

27 00 00 00 00 00 e0 00 39d+13:34:53.008 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

ec 00 00 00 00 00 a0 00 39d+13:34:53.007 IDENTIFY DEVICE

ef 03 46 00 00 00 a0 00 39d+13:34:53.007 SET FEATURES [set transfer mode]

27 00 00 00 00 00 e0 00 39d+13:34:53.007 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

 

Error 23 occurred at disk power-on lifetime: 12956 hours (539 days + 20 hours)

When the command that caused the error occurred, the device was active or idle.

 

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

 

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

60 00 c8 ff ff ff 4f 00 39d+13:34:50.170 READ FPDMA QUEUED

27 00 00 00 00 00 e0 00 39d+13:34:50.169 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

ec 00 00 00 00 00 a0 00 39d+13:34:50.168 IDENTIFY DEVICE

ef 03 46 00 00 00 a0 00 39d+13:34:50.168 SET FEATURES [set transfer mode]

27 00 00 00 00 00 e0 00 39d+13:34:50.168 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

 

Error 22 occurred at disk power-on lifetime: 12956 hours (539 days + 20 hours)

When the command that caused the error occurred, the device was active or idle.

 

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

 

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

60 00 c8 ff ff ff 4f 00 39d+13:34:47.331 READ FPDMA QUEUED

27 00 00 00 00 00 e0 00 39d+13:34:47.331 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

ec 00 00 00 00 00 a0 00 39d+13:34:47.330 IDENTIFY DEVICE

ef 03 46 00 00 00 a0 00 39d+13:34:47.330 SET FEATURES [set transfer mode]

27 00 00 00 00 00 e0 00 39d+13:34:47.329 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

 

Error 21 occurred at disk power-on lifetime: 12956 hours (539 days + 20 hours)

When the command that caused the error occurred, the device was active or idle.

 

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

 

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

60 00 c8 ff ff ff 4f 00 39d+13:34:44.483 READ FPDMA QUEUED

27 00 00 00 00 00 e0 00 39d+13:34:44.483 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

ec 00 00 00 00 00 a0 00 39d+13:34:44.482 IDENTIFY DEVICE

ef 03 46 00 00 00 a0 00 39d+13:34:44.482 SET FEATURES [set transfer mode]

27 00 00 00 00 00 e0 00 39d+13:34:44.482 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

 

Error 20 occurred at disk power-on lifetime: 12956 hours (539 days + 20 hours)

When the command that caused the error occurred, the device was active or idle.

 

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

 

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

60 00 c8 ff ff ff 4f 00 39d+13:34:41.644 READ FPDMA QUEUED

27 00 00 00 00 00 e0 00 39d+13:34:41.644 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

ec 00 00 00 00 00 a0 00 39d+13:34:41.643 IDENTIFY DEVICE

ef 03 46 00 00 00 a0 00 39d+13:34:41.643 SET FEATURES [set transfer mode]

27 00 00 00 00 00 e0 00 39d+13:34:41.643 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

 

SMART Self-test log structure revision number 1

Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error

# 1 Extended offline Interrupted (host reset) 90% 30032 -

 

SMART Selective self-test log data structure revision number 1

SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS

1 0 0 Not_testing

2 0 0 Not_testing

3 0 0 Not_testing

4 0 0 Not_testing

5 0 0 Not_testing

Selective self-test flags (0x0):

After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.

 

root@mk259:~#

Udostępnij ten post


Link to postu
Udostępnij na innych stronach

Bądź aktywny! Zaloguj się lub utwórz konto

Tylko zarejestrowani użytkownicy mogą komentować zawartość tej strony

Utwórz konto

Zarejestruj nowe konto, to proste!

Zarejestruj nowe konto

Zaloguj się

Posiadasz własne konto? Użyj go!

Zaloguj się


×